Solutions

Vibrations

  • 1/1 octave
  • 1/3 octave
  • accelerometers
  • analyzers
  • calibrators
  • dosimeters
  • FFT
  • force sensor
  • genera
  • general purpose
  • high temperatur
  • mems
  • piezoelectic
  • sound level meters
  • tr
  • triaxial
  • vibratio
  • vibration level
  • vibration m
  • vibration meters

[ Dytran ]

3030 SERIES

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • miniature

The Dytran series 3030 is a miniature IEPE piezoelectric accelerometer, weighing just 7.2 grams. Available with a 10 mV/g sensitivity and 500g sensing range, the series 3030 features a rugged stainless steel construction and is available with an abbreviated low–end frequency response as low as 2 Hz, ensuring sensitivity stability during rapid thermal transient conditions. Units are hermetically sealed for reliable operation in high humidity and dirty environments.

More info

[ Dytran ]

3049 SERIES

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • general purpose
  • miniature

The Dytran series 3049 is a rugged general purpose miniature accelerometer available in charge mode and IEPE versions. Featuring a ceramic shear sensing element packaged in a light–weight titanium housing, series 3049 is hermetically sealed for reliable operation in high humidity and dirty environments. Some of the models in this series are series designed to reliably operate in temperatures up to +350°F (+177°C). This series of piezoelectric accelerometers offer the same high reliability performance with various mounting capabilities.

More info

[ Dytran ]

3062 SERIES

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • Airborne

3062 SERIES, AIRBORNE ACCELEROMETER The Dytran series 3062 is an IEPE piezoelectric accelerometer expressly designed to cover most wide band frequency vibration measurement points of Rotor, Track and Balance (RTB); airframe; helicopter; and fixed wing aircraft. The industry has commonly referred to these sensors as "spark plug type", due to their similar appearance. Available in various sensitivities the 3062 series features a hermetically sealed stainless steel construction for use in high humidity and dirty environments, as well as case isolation to avoid EMI/ground loop interference. Units feature an axial mounted military style 3–pin Bayonet connector, 1/4–28 mounting threads and lockwire holes.

More info

[ Dytran ]

7583 SERIES

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • triaxial
  • mems

The Dytran 7583 series provides VC–MEMS triaxial measurements in a rugged hermetically sealed package. This high–performance triaxial variable capacitance (VC) accelerometer is offered in multiple ranges to cover your acceleration measurement needs. It features outstanding thermal stability due to superior temperature compensation design and extended frequency response. This accelerometer module combines three integrated VC accelerometer chips with high drive, low impedance buffering for measuring acceleration in commercial and industrial environments. Tailored for zero-to-medium frequency applications that require extended frequency ranges, from 0 to 7,000 Hz. The hermetically sealed titanium case has an integral 5/16–32 9–pin receptacle, and is easily mounted using any of the following: two M4 screws (6687A1), two 8–32 screws (6753A1), a ¼–28 mounting stud (6360), or ¼–28 to M6 mounting stud all of which are supplied. Units are hermetically sealed for reliable operation in high humidity and dirty environments.

More info

[ Dytran ]

MODEL 1050C HIGH TEMPERATURE FORCE SENSOR

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • force sensor

The Dytran model 1050C is a piezoelectric charge mode force sensor, designed to measure both compressive and tensile forces from 10 to 5,000 lbf over a wide frequency range. Offered with a sensitivity of–18 pC/lbf, this dynamic force sensor can measure up to 500 lbs full scale in tension mode, with reliable high temperature operation to +500°F (+260°C). Design of the model 1050C features a quartz shear sensing element, operating in compression mode and packaged in a rugged stainless steel housing for an overall weight of 32 grams. Units incorporate a 10–32 axial connector and a 1/4–28 tapped hole located at the top of the sensor housing for ease of mounting.

More info

[ Dytran ]

MODEL 3256C

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • high temperature

The Dytran model 3256C is a single axis piezoelectric charge mode accelerometer with wide bandwidth, designed to provide cost effective general purpose vibration monitoring in temperatures up to +375°F (+190°C). Offered with a sensitivity of 15 pC/g, the model 3256C features a lightweight, robust, hermetically sealed titanium housing with an axial 10–32 connector and 10–32 mounting hole, allowing it to be utilized in a variety of environments.

More info

[ MMF - Metra ]

Vibro Metra - Body

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

PC Based Whole-Body Vibration Measurement Vibro Metra Body is applied for measuring human whole-body vibrations. Whole-body vibrations are caused by vibrations or shocks which are transmitted by machines and vehicles in the workplace via seat or feet. If a person is exposed to strong whole-body vibrations, safety and health are endangered and it is proven that backache can be provoked or aggravated. The "vibration directive” (directive 2002/44/EC) defines minimum requirements for the protection against risks arising from whole-body vibrations.

More info

[ MMF - Metra ]

Vibro Metra - Hand

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

PC Based Hand-Arm Vibration Measurement Vibro Metra Hand is applied for measuring human hand-arm vibrations. Hand-arm vibrations are caused by vibrations or shocks which are transmitted by tools, machines and vehicles in the workplace via inner hand and fingers. If a person is exposed to strong hand-arm vibrations, safety and health are endangered and there is an increasing risk of bone, joint and muscle diseases. The "vibration directive” (directive 2002/44/EC) defines minimum requirements for the protection against risks arising from hand-arm vibrations. The measurements are based on the international standards ISO 5349 and ISO 8041.

More info

[ MMF - Metra ]

Vibro Metra - Ship

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

PC Based Measuring System for Ship Vibration Vibro Metra Ship is used to measure human whole-body vibrations on ships. Whole-body vibrations are caused by vibrations which are transmitted from drives and machines to a person that is standing, sitting or lying down. If the crew is exposed to strong whole-body vibrations, safety and health are endangered. Too strong vibrations also diminish the comfort of the passengers in their cabins. The international standard ISO 6954 provides guide values for different classes of rooms. Exceeding these guide values may cause complaints. For acceptance inspections, parties can use these guide values or agree on their own values.

More info

[ MMF - Metra ]

VM 31- Human Vibration Analyzer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The VM-31 Human Vibration Analyzer from MMF makes a versatile tool for the measurement of human response to vibrations, condition monitoring of machinery or as vibration meter and frequency analyzer for other applications requiring single or tri-axial vibration measurements. The meter’s compact design with a colored OLED display allows for quick and user-friendly operation.

More info

[ Monitran ]

VM220

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The MTN/VM220 Vibration Meter is a rechargeable, portable instrument designed to operate with a constant current type accelerometer to provide accurate vibration measurements. Conforming to ISO10816-3/7, MTN/VM220 will display RMS, peak, peak-peak, crest factor and bearing condition on its colour screen. Up to 100 time-stamped readings can be stored to non-volatile memory. The MTN/VM220 is an invaluable trouble-shooting tool for instrumentation engineers familiar with the problems of plant vibration monitoring, providing an instant readout of the condition of bearings and rotating parts.

More info

[ Svantek ]

SV 105AF Triaxial Hand-Arm Accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • force sensor

More info

[ Svantek ]

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SV 803 Wireless Vibration Monitor DIN 45699

More info

[ Svantek ]

SP 95 – Impact Ball

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SP 95 Impact Ball is used for sound insulation testing in light weight structures where a standard (tapping machine) impact sound source would create too much impact force. It has been designed in accordance to ISO 10140-5 and ISO 16283-2 standards. The use of SP 95 Impact Ball is very easy - it is dropped vertically in a free fall from height of 100 cm to the surface of the floor. In practice SP 95 can be used to assess soft impacts related to human disturbance, such as children jumping.

More info

[ Svantek ]

SV 103 HAND-ARM VIBRATION DOSIMETER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • dosimeters
  • accelerometers
  • mems
  • triaxial
  • 1/3 octave
  • 1/1 octave

SV103 Personal Human Vibration Exposure meter is dedicated to hand-arm vibration measurements. The instrument meets ISO 8041:2005 and is the ideal choice for making measurements according to ISO 5349 and European Directive 2002/44/EC. Hand-arm vibration is when mechanical vibrations are transmitted to the human hand when in contact with the surface of a vibrating machine such as an electric drill. - Small, compact style dosimeter - Personal Daily Vibration Exposure Meter complying to ISO 8041 - Measurement under gloves according to ISO 10819 - Triaxial MEMS accelerometer - 1/1 or 1/3 octave real-time analysis - Contact force measurement - Time-domain signal recording

More info

[ Svantek ]

SV 105A Hand-arm Triaxial Accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • triaxial
  • accelerometers
  • mems

- Meets ISO 8041 and ISO 5349 - Low-power consumption - No disturbance to operator - Dedicated to SV 106 instrument - TEDS memory

More info

[ Svantek ]

SV 105B Triaxial Hand-Arm Accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SV 105B Triaxial Hand-Arm Accelerometer is dedicated to Human Vibration measurements performed according to ISO 5349-2 with SV 106A six channel analyser. For in-situ checks and periodic verification of the SV 105B the SA 105B adapter (option) is necessary. The accelerometer has TEDS memory that remembers the calibration factor transferred to SV 106A instrument.

More info

[ Svantek ]

SV 106 6-CHANNEL HUMAN VIBRATION ANALYSER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • 1/3 octave
  • 1/1 octave
  • vibration meters
  •  
  • analyzers

- Human Vibration measurements meeting ISO 8041:2005, ISO 2631-1,2&5 (including VDV and MTVV) and ISO 5349 - Six channels for acceleration (IEPE type) and two channels for static force measurements - Time-domain signal recording (meeting ISO 2631-5) - 1/1 and 1/3 octave real-time analysis - Advanced data logger including spectral analysis

More info

[ Svantek ]

SV 107B Triaxial Hand-Arm Accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SV 107B is a triaxial hand-arm vibration accelerometer dedicated to measurements according to ISO 5349-2 with SV 103 hand-arm vibration dosimeter. The SV 107B has in-built force sensors to detect the contact and to exclude periods of time when the tool is not in use. For in-situ checks and periodic verification of the SV 107B the SA 105B adapter (option) is necessary. The accelerometer has TEDS memory that remembers the calibration factor transferred to SV 103 instrument.

More info

[ Svantek ]

SV 111 - Vibration Calibrator

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SV 111 Vibration Calibrator is the State of the Art instrument designed for in-situ checks according to ISO 8041. In-situ checks are intended for application in the field prior to and following a measurement or series of measurements. They act as a check of the instrument’s basic calibration and functionality. The SV 111 is suitable for calibration checks of various types of vibration meters at different frequencies from 16 Hz up to 640 Hz. Depending on the selected frequency user may select level of calibration from 1 m/s2 to 10 m/s2.

More info

[ Svantek ]

SV 150 - Hand-arm triaxial accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor's TEDS memory stores information about calibration factor limiting the risk of configuration errors. The accelerometer is supplied with three different diameter fixing clamps to conveniently match the grip of the vibrating tool being measured. SV 150 offers more robust and lower cost alternative to a traditional piezo-electric accelerometer.

More info

[ Svantek ]

SV 151 triaxial accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • triaxial
  • accelerometers
  • mems

The SV 151 is a low cost tri-axial accelerometer based on MEMS transducer technology. Fully complying with ISO 8041, it has a built-in TEDS memory that keeps information about the accelerometer sensitivity that is automatically transferred to the vibration analyser being used. A full ISO8041 in-situ check for before and after measurement is possible using the SV111 portable vibration calibrator and dedicated SA40* adaptor.

More info

[ Svantek ]

SV 38V - Seat Accelerometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

SV 38V Seat Accelerometer is a triaxial Whole-Body seat accelerometer based on MEMS transducers dedicated to SV 106 instrument for Human Vibration measurements according to ISO 2631-1 requirements both on a seat pad or seat back. The SV 38V uses low voltage and consumes much less energy than IEPE accelerometers extending battery life time of SV 106 instrument. The built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to the SV 106 vibration analyser helping to avoid configuration errors.

More info

[ Svantek ]

SV100A - Human Vibration Dosimeter

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • vibration meters

The new SV100A is a wireless whole-body vibration exposure meter suitable for whole-body measurements in accordance with ISO 2631

More info

[ Svantek ]

SV110 hand-held vibration calibrator

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • calibrators

 Hand-held portable vibration calibrator  Two frequencies 79.58 Hz and 159.2 Hz  Maximum load of 0.3 kg! Calibration checks of machine vibration accelerometers In-situ checks of hand-arm vibration accelerometers according to ISO 8041  Cross-axis/transverse vibrations detection with built-in reference accelerometer

More info

[ Svantek ]

SV258 Pro : Vibration and Noise Monitoring Station

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The vibration and noise monitoring station SV258 PRO is dedicated to building vibration measurements that use methods based on Peak Particle Velocity and Dominant Frequency. The measurement of human vibration exposure in buildings is possible as the program allows simultaneous measurement of velocity and acceleration of vibrations with two independent steps of recording. In addition, it is possible to enrich the measurement with noise monitoring measurement data

More info

[ Svantek ]

SV38 WHOLE-BODY VIBRATION ACCELEROMETER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • mems

Meets ISO 8041 and ISO 2631 IEPE / ICP powering Low price Dedicated to SVAN 958 and SVAN 958A

More info

[ Svantek ]

SV80 GENERAL PURPOSE VIBRATION ACCELEROMETER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • general purpose

More info

[ Svantek ]

SV81 GENERAL PURPOSE VIBRATION ACCELEROMETER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • general purpose
  • piezoelectric

More info

[ Svantek ]

SV84 GROUND VIBRATION ACCELEROMETER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • piezoelectic
  • triaxial

Piezoelectic accelerometer dedicated to building/ground structure vibration measurements Compatible with SVAN 958A and SV 106 Hermetically sealed

More info

[ Svantek ]

SVAN 958A 4-CHANNEL SOUND AND VIBRATION ANALYSER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • sound level meters
  • vibration meters
  • 1/3 octave
  • 1/1 octave
  • FFT
  • Analyzers

- Four channels sound or vibration configurable - Human Vibration measurements meeting ISO 8041:2005 including VDV and MTVV - Sound level meter Class 1, IEC 61672 - Advanced data logger including spectral analysis - USB memory stick providing almost unlimited logging capability - Advanced trigger and alarm functions

More info

[ Svantek ]

SVAN 974 VIBRATION ANALYSER

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • analyzers
  • FFT
  • vibration level meters

- Low-cost vibration analyser - IEPE and charge type accelerometers supported - Three parallel independent profiles - parallel acceleration, velocity and displacement measurements - Built-in machine filter (10 Hz ÷ 1 kHz) meeting ISO 10816 requirements - FFT real time analysis - up to 1600 lines (included) - Advanced Data Logger of RMS / Max / Peak results including spectral analysis

More info

[ Svantek ]

Svan PC ++

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

Svan PC ++ is an advanced PC software supporting SVANTEK measuring instruments including SV10x, SVAN95x and SVAN97x series. Functionalities and extended capabilities implemented in this advanced application make each SVANTEK device an easy in use and complete measuring system.

More info

[ VibraSens ]

General purpose

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • general purpose

The most standard IEPE industrial vibration sensor .... If you don't know which one you should buy, this is the one! The best ratio price/performance. This one is used worldwide, for almost every application : windturbine (100 mV/g and low frequency 500 mV/g with M12 connector), fans, pumps...

More info

[ VibraSens ]

Model 101.11, 150°C high temperature

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • high temperature

More info

[ VibraSens ]

Model 103.02, General Purpose

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • general purpose

More info

[ VibraSens ]

Model 131.01: Triaxial, General Purpose

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • triaxial
  • general purpose

More info

[ VibraSens ]

Model 131.02: Triaxial, General Purpose

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • accelerometers
  • triaxial
  • general purpose

More info

[ VibraSens ]

Model 138.01: Triaxial, Compact

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • accelerometers
  • triaxial

More info