Solutions

Torque

REACTIVE TORQUE SENSORS, NON-ROTATING : (reactive or static torque transducers) are generally used for reaction measurements in most varying applications. They are wear-free and, like all of our torque sensors, designed in such way that the limit shear force and the limit thrust load, indicated in our technical data, only have minimum strain on the sensor element and thus do not affect the measurement result. By default, our sensors provide an analog, unamplified strain gauge bridge output signal in mV/V. ROTATING TORQUE SENSORS WITH NON CONTACT TRANSMISSION : are supplied as active sensors with integrated measuring amplifiers; as output signals, analog ±5V by default, ±10V optionally, or digital RS485 or USB are available. By the non contact transmission, the measurement data are transmitted maintenance-free and without signal distortion between rotor and stator. Integrated speed/angle measurement is available as an option for al­most all non contact sensors.Typical applications for this sensor type are for example screw driving technologies, test bench applications such as the examination of en­gines, gears, bearings and seals, … wherever high speeds in continuous oper­a­tion and standardized output signals are required on sensor side. ROTATING TORQUE SENSORS WITH SLIP RINGS send an analog, un­amplified strain gauge bridge output signal in mV/V, which is trans­mit­ted via high-quality, low-wear slip rings. An integrated speed/angle measurement is standardized in most torque sensors with slip ring transmission. Typical applications for this type of sensor are for example screw driving technologies, test bench applications such as testing of engines, gears, bearings and seals ...