Solutions

Air quality

[ Casella Solutions ]

Noise level meters, noise dose meters, noise level calibrators. Environmental meters (dust, T°, weather stations & sensors,…).

Apex2 personal sampling pump

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The Apex2 range are the new generation of personal sampling pumps offering class beating performance combined with a slim ergonomic design. With the addition of Bluetooth® Connectivity you can monitor your sampling from your mobile device without having to disturb the wearer. Email run data alongside any photos or notes to make your reporting easier.

More info

Casella Vortex3

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

High flow air sampling pump - 12L/min with a filter **Unique, patent pending design** Designed to save time when transporting and setting up pumps, the Vortex3 is also designed with harsh environments in mind, built to last and be reliable! - Lock multiple units together to speed up deployment - Weighs only 2.17kg (4.78lb), made from rugged ABS - Tube and sampling head carried on pump - IP65 for easy decontamination **Simple to use** Essential to get up and running quickly, to save time and the Vortex3 is incredible easy to use. - Colour display visible in all light conditions - Large keypad for easy use with gloves - Quick start up, calibrate and get sampling **Unique Airwave App** In order to save time and effort when downloading data and reporting, it also gives confidence as the measurement progresses as it allows the pump to be checked remotely. - See all run information and pump status remotely - Input notes and site data with location stamp - Email results to speed up reports and give traceability

More info

CEL-712 Dust Detective

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

Learn more about the CEL-712 Dust Detective. For site operators and managers who need to monitor the dust levels within their site, inside or outside, or at the boundary, the Casella Dust Detective is the ideal tool for survey measurements. It comprises of the Microdust Pro, a real time, logging dust monitor and a personal sampling pump all housed in a rugged casing to IP65. This means that you can use the Dust Detective both indoors and out and it’s unobtrusive with its black casing so will not draw attention. Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of accessories for static and size selective sampling applications.

More info

Filters

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

Filters are available in a number of different materials, the most common type is Glass Fibre where gravimetric weighing is the only analysis. If further analysis is required or the hazard being sampled is corrosive or if there is interference with glass fibre then other types are recommended, e.g. Mixed cellulose ester (MCE), PVC, PTFE, Polycarbonate, Quartz, Silver

More info

Flow Detective - Digital Air Flow Meter

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The Flow Detective is the first sampling pump airflow calibrator to measure pulsation for ISO 13137 compliance. The device displays a red indicator if pulsation the 10% compliance level is exceeded. It measures the flow of air sampling pumps to within 2% accuracy and when used with the Casella Apex2, it can achieve closed loop automatic calibration, so nothing has to be set manually.

More info

Guardian2 - Site Boundary Monitor

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The Guardian2 Site Boundary Monitor is designed to help you remain compliant with site emission levels, using remote monitoring and reporting of noise, dust and vibration levels. Powered by mains, solar or battery, the Guardian2 is ideal for any construction noise monitoring or environmental dust measurement location, no matter how remote. For further details on solar or battery power options see the solar and battery power section below. Simply plug in to the power source and it will begin continuous emission monitoring, its that simple!

More info

MICRODUST PRO CEL712

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of accessories for static and size selective sampling applications.

More info

Sampling heads

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

In general terms we draw a known volume of air using a sampling pump through a suitable sampling medium. For particulates and fumes it would generally be a ?lter paper. A typical sampling train for personal monitoring would look like this with the sampler mounted in the breathing zone. A personal sampling pump would be connected to a sampling head containing a suitable ?lter via a length of tubing. The pump is normally worn on the belt but it can be mounted on the back or the chest in a suitable harness. The sampling head, however, must be in the breathing zone for a valid sample. Dust is particles of solid material around 1µm to 1mm diameter. Larger particles are too heavy to remain airborne. Fumes are smaller than dust. They are solid particles formed by condensation from a gas and the particle size is typically <1µm. Dust can further be categorized into size fractions: Total Inhalable Dust, Respirable Dust and Thoracic dust. Here is a graph of the sampling convention.

More info

Vapex - Air Sampling Pump

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The VAPex range has been designed particularly for low flow sampling of vapours and gases in working environments. Its Intrinsically Safe design and remote operation via the Airwave App makes it ideal for modern-day sampling requirements. With a wide flow range of 20mL - 500mL, the VAPex personal sampling pump has outstanding back pressure capability.

More info

[ Hanwell Instruments ]

Hanwell Pro is the most superior continuous environmental monitoring system. The monitoring system features wireless data loggers, high accuracy sensors, LCD display and unrivalled radio strength, which allows the system to overcome the most complex obstacles. Hanwell Pro is a scalable wireless monitoring system that can be used from one to multiple facilities across the world. It is the most flexible, accurate and reliable environmental monitoring and control system in the world. With the Hanwell Pro system, you can monitor what you want, as often as you want and access alarms and data wherever you want. Nothing on the market can match the comprehensive technology that is available through the Hanwell Pro range. Wireless Radiologgers for pharmaceutical (FDA : CFR 21 Part 11) and industrial applications.

ClimaBox

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters
  • CO2
  • SR2
  • CR2

The ClimaBox has been designed to monitor CO2, temperature and humidity in one instrument. The unit was designed specifically to monitor air quality in terms of carbon dioxide in the air which has been directly linked with sick buildings syndrome (SBS). Additionally the performance of heating and air handling systems can be analysed to improve the efficiency and/or provide diagnostic data for predicting service intervals.

More info

[ LSI ]

Weather instrumentation and air quality solutions

M-Log

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The compact and versatile data logger M-Log is a line of compact data loggers for environmental monitoring, suitable for portable indoor applications. Small and flexible, but also powerful and reliablem M-Log can be used in virtually unlimited environmental applications. Typically M-Log (ELO009) is used on a portable tripod fot Thermal Environmental measurements for the assessment of thermal comfort and stress, air quality, ventilation measurements, thermo-hygrometric measurements for assessing the energy efficientcy of buildings and HVAC tests. The ELO008 model, having terminal block input, is more suitable for measurements always in the field of environmental monitoring, but in industrial situations. Typically, thanks to the Modbus-RTU protocol (Master/Slave), it is used as an interface between sensors and systems such as PLCs, as well as storing processed values and sending instantaneous values to PC.

More info

Net radiometer

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

Sensor for measuring the radiant heat flow Also designed for environments with low air velocities in which it is possible to obtain a measurement close to the plane average radiant temperature with the direction of the heat flow. The integrated air temperature sensor allows the calculation of the planar radiant asymmetry value on the three axes. Portable use is possible or can be attached to a stand for extended measurements.

More info

R-Log – Radio Data logger

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

The data logger for wireless networks R-Log data logger is a line of compact data loggers for environmental monitoring, suitable for portable indoor applications, but also fixed for continuous monitoring. R-Log can be connected to a wide range of LSI Lastem’s sensor. R-Log can receive measurements via radio from radio sensors, or from other R-Log units in order to create a wireless sensor network. Small and flexible, but also powerful and reliable, R-log is used in multi-measurement (different parameters) and multi-point (different measurement points) applications.

More info

SO2/ NO2/ CO/ H2S/ O2/ O3/ NO/NH3/ CO2/ VOC sensors

  • Best Selling
  • Hardware
  • Software
  • Transmission
  • Parameters

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with LSI Lastem data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or LSI Lastem data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

More info